How to Save Overwatered String Of Hearts? [Step by Step]

As an Amazon Associate I earn from qualifying purchases. Without Any Extra Cost to You!

The String of Hearts is a beautiful hanging plant for any house that features delicate confetti-sized, heart-shaped leaves that trail over a pot from long spindly stems like a beautiful beaded headdress. 

With enough water, sunlight, and suitable soil, this type of plant can proliferate. Overwatering your string of hearts, on the other hand, can cause a variety of issues for your plant.

Let’s start with the question of how to determine if you have overwatered your String of Hearts? 

For starters, Overwatered can cause iron deficiency, which usually results in yellow leaves. Overwatering can also cause the leaves to turn black, and these spots can vary in shape, colour, and size. Lastly, overwatering cause your soil to become waterlogged and prevents aerating roots.

Now, don’t get satisfied; we are just getting warmed up. 

To help the plant, you need to have the right idea of watering your String of Hearts. That’s why we’ve explained every sign with its possible solutions. 

Therefore, we would request you to read along and save your String of Hearts!!

3 Signs of Overwatered String Of Hearts [Along With Solutions]

overwatered string of hearts
source: https://www.houzz.com/

The overwatering issue mainly occurs for owner negligence. And by the time you get to understand it, it is too late, or it is very close to too late.

You must first identify the symptoms, after which you must have sufficient knowledge to mix out this problem. So let’s know the necessary steps to solve this problem.

If you don’t look after the plant properly. Your silly mistakes are the reason why your plant is sick right now! But hey, you can fix this! 

To help you, we’ve explained the signs and their solutions-

1. Turning leaves in yellow

Overwatering can cause iron deficiency, which usually results in yellow leaves. Yellowing leaves aren’t just a problem for your string of hearts plant. They can also affect other potting plants.

When you overwater your plant, some of the soil’s nutrients are washed away, and the laccases of nutrients cause your plant’s leaves to turn yellow.

2. Leaves can wilt by root rot 

Overwatering causes excess moisture in the soil, allowing fungus and bacteria to thrive and cause root rot. On the other hand, this problem causes your string of heart plant leaves to wilt, so overwatering causes your soil to become waterlogged and prevents aerating roots.

3. Leaves turning black and brown colour

If you overwater your plant, fungus and bacteria can breed and attack the leaves and turning them into small brown spots trimmed in yellow. Overwatering can also cause the leaves to turn black, and these spots can vary in shape, colour, and size.

You might be read also: Why Pothos Leaves Are Turning Brown?

How to save overwatered string of heartHow to save overwatered string of heart

There are two ways to save your plant: re-pot your plant, and the second is propagating your plant. If the damage to your plant is minor, you can save it by repotting, or if the situation worsens, you must choose the propagating process. We will discuss two processes that you can use whenever you need them.

1. Remove from soil

If you know how to remove a plant from the soil, it will be simple. A string of Hearts grows from bulb-like roots known as aerial tubers, making them easy to remove from the soil. Remove the plant from its soil, making sure to shake out the wet soil and cutting off every dead root or leaves.

2. Let the plant dry a little bit

Allowing your heart plant string to dry does not mean allowing it to become bone dry. Allowing the plant to air dry for a few hours may allow the moisture to dry out slightly.

3. Choose new soil

Don’t use previous soil because overwatering washes all types of nutrients from the soil, so this soil can not give your pat enough nutrients. On the other hand, since a String of Hearts is a succulent lover plant, you should choose soil rich in nutrients.

4. Set your new pot properly

One of the most important things you can do is select a pot with suitable drainage holes. These drainage holes will reduce excess water in the pot, which will help solve the overwatering problem.

If you don’t have a pot like this, add some rocks to the bottom of the pot and make three to four holes in the bottom.

5. Finally, pot your plant 

You can pot the plant in your new pot after it has dried out. Be careful if the soil is almost wet after potting plant doesn’t add water because that can create overwater problem again.

 To test, insert your finger about an inch deep into the soil and see if your finger quickly enters the soil. Be sure that the soil is wet. So water the plant before the soil dries out entirely.

You Might be interested to read also: How To Save Overwatered Aloe Plant?

How to Propagate An Overwatered String of HeartsHow to Propagate An Overwatered String of Hearts

Growing new plants from the dying plant’s surviving vines and tubers are referred to as propagating. To grow new plants, there are two propagation ways soil propagation and water propagation.

Soil Propagation

  • Make an airy soil mixture of a succulent mix suitable for your plant in a tray or pot.
  • Select vines with nodes that will create better leaves and cut them from your dying plant.
  • Ensure that the leaves are above the soil because this will be detrimental to your plant’s health and growth, so remember the advice to stop rotting.
  • Don’t overwater your new cutting vines because wet soil is good enough for them.
  • Wait a few weeks to see the cutting vines are growing well. If the growing rate is reasonable, then repot the cuttings into a larger pot filled with a succulent mix.

Water Propagation

  • Select a few healthy cutting vines from your String of Hearts and remove the leaves from the selecting cuttings.
  • Take a glass of clean water, cover it with clear plastic and poke a couple of holes in it. After that, insert your cuttings’ roots through the hole in the water and allow the rest of the cuttings to hang freely outside the glass.
  • Don’t place the glass in direct sunlight because it can be harmful to growth, so choosing to place and set your glass was indirectly sunshine.
  • Allow at least 3-4 weeks for the cuttings to produce new roots. After some weeks, you can report the cuttings in the succulent mix once you see a healthy root.

How to care of a String of Hearts plantHow to care of a String of Hearts plant

Continuing the caring process can make everything healthier and more beautiful, and caring for a string of heart plants is very simple. This article contains some basic information on how to care for String of Hearts.

1. Ensure proper soil with proper drainage

If you don’t want to see the unhealthy string of heart, avoid using wet soggy soil and instead opt for succulent soil, which is best for the Sting of Hearts. To improve drainage, incorporate some small pebbles or orchid parts into the soil and make sure there are holes in the soil’s bottom.

2. Ensure Proper sunlight

You can place your plant in direct sunlight for a couple of hours in the morning, but a string of hearts prefer lots of bright light. So choose a room in your home with the most natural light to grow your String of Hearts. If you don’t have this kind of space, you can move your plant closer to a window where the sun will indirectly shine.

3. Water you plant properly

Allowing the soil to completely dry before watering is a good idea because they prefer to spend a lot of time in dry soil. However, you can water your string of hearts at least two or three days per week, and you can water even less in the fall and winter if you like.

4. Ensure proper temperature

Most households have average temperatures ranging from 64°F to 75°F (18-24°C), and you might be surprised to know that String of Heart can thrive in these conditions. However, you must ensure that temperatures do not rise or fall from 27°C to 16°C.

5. Use fertiliser

A string of Hearts only requires half-strength liquid fertilizer once a month in the spring and summer. You can fertilize your plant at the time of watering, and we recommend using Dyna Gro Grow fertilizer because it is now used for almost everything. 

FAQs:

Question: Is the string of hearts an indoor plant?

Answer: Although it is most commonly grown as a houseplant, the string of hearts plant is also used as a sprawling ground cover in rock gardens or to cascade down walls in warm Mediterranean climates.

Question: Does a string of hearts like humidity?

Answer: In average household humidity, the string of hearts works well. There’s no need to get too worked up about it. During propagation, you may want to increase humidity levels. 

Question: Do string of hearts bloom?

Answer: Plants primarily bloom in the summer and fall, but flowers may appear at random times throughout the year. The inch-long flowers have a bulbous base and a tubular corolla in shades ranging from white to pale magenta.

Question: What do mealybugs look like on succulents?

Answer: Mealybugs are always looking for a white cottony substance that can be found near new growth on your succulent.

Take Away

With all of this in mind, saving an overwatered String of Hearts isn’t an impossible task with some primary care; the String of Hearts plant is easy to care for and lovely to look at. 

So, what is your opinion on our review? 

Share your answers and thoughts with us by leaving a comment. Good luck saving your over-watered String of Hearts!